Hi Rob,

The Konnect outputs act more like a switch not a coil.  Exactly what type of 5V DC loads do you need to drive?

Regards

TK

Group: DynoMotion	Message: 11163	From: Rjreese29	Date: 3/7/2015
Subject: Re: Konnect outputs

Hi tom, Here's some more details on the loads I am trying to drive. I am trying to use a c36 quad relay board from cnc4pc.    On state voltage is 2-5vdc Min on state input current 16mA Max off state voltage .8v Thanks for your help, Rob On Mar 6, 2015, at 12:42 PM, Tom Kerekes tk@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:   Hi Rob, The Konnect outputs act more like a switch not a coil.  Exactly what type of 5V DC loads do you need to drive? Regards TK Group: DynoMotion Message: 11164 From: Tom Kerekes Date: 3/7/2015 Subject: Re: Konnect outputs Attachments : ULN2003-11164.png Hi Rob, It looks like the C36 uses a darlington transistor input with internal pull down resistance to be sure to turn off.  So you should be able to use Konnect to simply switch the input to +5V See the attached diagram. HTH Regards TK Group: DynoMotion Message: 11182 From: Rjreese29 Date: 3/9/2015 Subject: Re: Konnect outputs [1 Attachment] Hi Tom, That worked out great. Thanks for the wiring diagram!!! It worked out great & we using the konnect outputs now.  Thanks, Rob On Mar 7, 2015, at 12:31 AM, Tom Kerekes tk@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:   Hi Rob, It looks like the C36 uses a darlington transistor input with internal pull down resistance to be sure to turn off.  So you should be able to use Konnect to simply switch the input to +5V See the attached diagram. HTH Regards TK